Saturday, 17 November 2012

Maggie M Deck


The plastic deck is not flat so the construction starts with assembling the 5 cross spars. These are in the form of 3 plastic pieces glued into a "I" section. Each beam is fitted in to dimensions measured from the rear corner of the top edge of the hull.


A plastic bead is also glued in all around the inside top edge of the hull to glue the deck to


In a move from the plans I decided to cut an additional hatch into the front 1/3rd of the deck. This additional cut out is for loading and unloading the battery


Ledges and up stands provide location for deck features and also stiffness to the deck.

Part of the Maggie M build log


No comments:

LinkWithin

Related Posts Plugin for WordPress, Blogger...